煤燃燒過程分析與建模及其應用于Texaco氣化爐模擬研究
作者/來源：李海洋，謝 芳，史永永，林 倩（貴州大學化學與化工學院，貴州 貴陽 550003） 日期： 2014-02-24 點擊率：1710
摘 要：以煤燃燒過程分析研究為基礎，將煤燃燒過程分解為煤干燥過程、煤熱解過程、燃燒過程和氣渣分離過程，詳細分析各過程的機理并建立相應數學模型，重點開展對常規分離器模型的優化。將該煤燃燒過程模型應用于Texaco氣化爐，通過對該過程進行編程求解，計算所得的模擬值與文獻值吻合較好，證明所建立的煤燃燒過程模型準確合理，為煤燃燒過程的工藝流程的數值模擬研究奠定了基礎，可用于氣體組成、除塵、脫硫等不同工藝過程的數值模擬研究。在此模型的基礎上，進一步分析了在一定物流參數下不同溫度對Texaco氣化爐煤燃燒生成合成氣組成的影響。
關鍵詞：煤燃燒；模型；模擬
中圖分類號：TQ534.4 文獻標識碼：A 文章編號：0253-4320（2012）07-0098-04
Analysis and modeling of coal burning process and its application simulation of Texaco gasifier
LI Hai-yang，XIE Fang，SHI Yong-yong，LIN Qian
（Chemistry and Chemical Engineering Institute，Guizhou University，Guiyan 550003，China）
Abstract：Based on the analysis of coal combustion process，the coal combustion process is separated into coal drying process，coal pyrogenation process，combustion process and slag separation process in this study. Each process is analyzed in detail and the corresponding mathematical model is established. The optimization of conventional separator model is focused. The model of coal combustion process is applied to Texaco gasifier. The simulated data is consistent with that the literature reported，which proves that the model of coal burning process established is reasonable. It is basic to the numerical simulation study of coal combustion process and can be applied in the numeri....
